10.The new settings will be displayed. Review them before you proceed. Click Next to save your new settings, or click Back to return to the previous screen.
11.The Bridge will attempt to connect to the wireless network using the new settings.
Make sure the Bridge’s Wireless LED is solidly lit or flashing. This indicates that the Bridge has connected to the wireless network. If the attempt succeeds, proceed to step 12.
If the attempt fails, you have two options offered by a
12.Disconnect the Ethernet network cable of the Bridge from the router or PC. Click Next to proceed, or click Back to return to the previous screen.
Chapter 4: Setting Up and Connecting the
Figure 4-13: Confirmation Screen
Figure 4-14: If the Bridge Does Not Connect... Screen
Figure 4-15: Disconnect the Network Cable from the Router
Screen
13
Running the Setup Wizard
