Wireless-G Notebook Adapter with SRX400

WPA-Personal for Connection

WPA Personal offers two encryption methods, TKIP and AES, with dynamic encryption keys. Select one of these methods. Then enter a passphrase.

Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be.

Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.

WPA2 - Personal Needed for Connection

AES is automatically used as the encryption method. Enter a passphrase on this screen.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be.

Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.

2.After the Adapter has been configured for the network, the Congratulations screen will appear. Click Connect to Network to connect to your network.

Congratulations! The profile is complete.

Chapter 5: Using the Wireless Network Monitor

Figure 5-16: WPA-Personal Needed for Connection

Figure 5-17: WPA2-Personal Needed for Connection

Figure 5-18: Congratulations Screen

26

Creating a New Profile

Page 31
Image 31
Linksys WPC54GX4 manual WPA-Personal Needed for Connection