Getting to Know the Presentation Player

Instant WirelessTM Series

Package Contents

Figure 1-1

•One Instant WirelessTM Presentation Player

•Two Removable Antennas

•One Power Adapter

•One Remote Control with Built-in Laser Pointer (two AAA batteries included)

•One Setup CD-ROM with User Guide

•Registration Card and Quick Installation (not shown)

•One 200 MHz PC Running Windows 98, Me, 2000 or XP

•One CD-ROM Drive

•128 Mb Ram

•802.11b Wireless Adapter or Ethernet Connection (for remote presenta- tions)

•Microsoft PowerPoint (needed to Upload presentations to the Presentation Player)

Presentation Player

	Figure 2-1
DC-IN	This is the jack where you will connect your power
	adapter.
Power Switch	This switch is used for turning the Player on and
	off.
TO Monitor/Projector	At this port, you will connect the VGA cable from
	the monitor or projector where your presentation
	will be displayed.
Reset	To reset the Presentation Player to its factory
	default settings, hold the Reset button in for about
	ten seconds.
LAN	This is where you will connect the Category 5
	Ethernet network cable from your PC’s Ethernet
	adapter.