Linksys WPG12 manual Connecting the Presentation Player

	Instant WirelessTM Series
Back	Goes back to the previous slide.
Center Round Button	Use like a mouse pad to move the cursor on the
	screen.
Left and Right Buttons	Use like left and right mouse buttons. Also acts as
	Next and Previous slide buttons when in the
	Presentation List.
Delete	Only way to delete your presentation from the
	Player.
Left and Right Arrows	Use to navigate left and right when in the
	Presentation List.
Up and Down Arrows	Use to navigate up and down.
Mode	Toggles between high and low resolutions.

Presentation Player

Chapter 3: Connecting the Presentation Player

1.Connect the VGA cable from your monitor or projector to the Presentation Player’s “TO Monitor/Projector” port.

Figure 3-1

2.Make sure that the Presentation Player is turned off. Plug the supplied power adapter into the jack on the Presentation Player’s back panel. Then, plug the other end into a power outlet (surge protection recommended). Turn on the Presentation Player. Only use the power adapter supplied with the Presentation Player. Use of a different adapter can result in product damage.

Figure 3-2

6 7