13
Chapter 5: Setting up the Presentation Player
Installation
Wireless-G Presentation Player
Chapter 5: Setting up the Presentation Player

Installation

The Presentation Player can play from any PC in your wireless network, but you will first need to install this utility
in each PC that will be used with the Presentation Player – once installed, it will not need to be done again.
1. Insert the Setup CD-ROM into your CD-ROM drive. The CD’s Wizard should start automatically and the
Welcome page for the Setup Utility will appear (as shown in Figure 5-1).
If it does not start automatically, click the Start button, select Run, and enter d:\setup.exe (where “d” is the
letter of your CD-ROM drive) in the Open field to start the autorun program.
On the Welcome page, click the Setup tab to start the installation procedure and place the Control Utility on
your current PC.
Click the User Guide tab to use this User Guide. Click the Exit tab to close the Setup Utility.
2. A screen like that shown in Figure 5-2 will appear.
Read the license agreement and click the Yes tab to accept the terms and continue the installation procedure.
If you click No, you will end the installation procedure.
Figure 5-1: Welcome
Figure 5-2: Software License Agreement