Chapter 3
Advanced Configuration
Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components.
Administration > Diagnostics
Ping Test
Ping The Ping test checks the status of a connection. Enter the address of the PC whose connection you wish to test and how many times you wish to test it. Then, click Start to Ping. The Ping Test screen will show if the test was successful. Click Close to return to the Diagnostics screen.
Ping Test
Traceroute Test
Traceroute To test the performance of a connection, click Traceroute to open the Traceroute Test screen. Enter the address of the PC whose connection you wish to test and click Traceroute. The Traceroute Test screen will show if the test was successful. Click Close to return to the Diagnostics screen.
Traceroute Test
Administration > Factory Defaults
The Administration > Factory Defaults screen allows you to restore the Router’s configuration to its factory default settings.
Factory Defaults
Restore Factory Defaults To reset the Router’s settings to the default values, select Restore Factory Defaults. Any settings you have saved will be lost when the default settings are restored.
Administration > Factory Defaults
Administration > Firmware Upgrade
The Administration > Firmware Upgrade screen allows you to upgrade the Router’s firmware. Do not upgrade the firmware unless you are experiencing problems with the Router or the new firmware has a feature you want to use.
Administration > Firmware Upgrade
27
