Wireless-G Broadband Router with SRX

The Administration Tab - Config Management

The Config Management screen allows you to backup the Router’s settings and restore them later. Simply, click the Backup button and save the config file to your hard drive. When you wish to restore the config file, click the Browse button to locate the file and then click the Restore button.

Figure 5-37: Administration Tab - Config Management

The Status Tab - Router

The Router screen on the Status Tab displays the Router’s current status.

Hardware Version. This shows the Router’s model number.

Firmware Version. This is the Router’s current firmware version.

Boot Version. This shows the Router’s BIOS version.

Current Time. This shows the time, as you set on the Setup Tab.

MAC Address. This is the Router’s MAC Address, as seen by your ISP.

Local MAC Address. This is the MAC Address for the Router’s LAN ports.

System Up Time. This is the amount of time since the Router was first booted up.

Connection Type. This shows the connection type you set on the Setup Tab. Connection settings then follow.

Chapter 5: Configuring the Wireless-G Broadband Router

Figure 5-38: Status Tab - Router

isp: your internet provider

mac address: the unique address that a manufacturer assigns to each networking device.

31

The Administration Tab - Config Management

Page 37
Image 37
Linksys WRT54GX manual Administration Tab Config Management, Status Tab Router, Isp your internet provider