Linksys WRVS4400N manual Wall-Mount Option, Mounting Dimensions

Wireless-N Gigabit Security Router with VPN

Wall-Mount Option

You will need two suitable screws (See Figure 5-7) to mount the Router. Make sure the screw size can fit into the criss-cross wall-mount slots.

1.On the Wireless Router’s back panel are two criss-cross wall-mount slots.

2.Determine where you want to mount the Wireless Router, and install two screws that are 2-9/16 in (64.5mm) apart.

3.Line up the Wireless Router so that the wall-mount slots line up with the two screws.

4.Place the wall-mount slots over the screws and slide the Wireless Router down until the screws fit snugly into the wall-mount slots.

Now that the hardware installation is complete, proceed to “Chapter 6: Setting up and Configuring the Wireless-N Router,” for directions on how to set up the Wireless-N Router."

Figure 5-7: Mounting Dimensions

Figure 5-8: Wall Mounting Hardware

Chapter 5: Connecting the Router 19

Placement Options