Wireless-N Gigabit Security Router with VPN

4.I am not able to access the Router’s Web-based Utility Setup page.

A.Refer to “Problem #2, I want to test my Internet connection” to verify that your computer is properly connected to the Router.

B.Refer to “Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter” to verify that your computer has an IP Address, Subnet Mask, Gateway, and DNS.

C.Set a static IP address on your system; refer to “Problem #1: I need to set a static IP address.”

D.Refer to “Problem #10: I need to remove the proxy settings or the dial-up pop-up window (for PPPoE users).”

5.I can’t get my Virtual Private Network (VPN) to work through the Router.

Access the Router’s web interface by going to http://192.168.1.1 or the IP address of the Router, and go to the VPN => VPN Pass Through tab. Make sure you have IPsec passthrough and/or PPTP passthrough enabled.

VPNs that use IPSec with the ESP (Encapsulation Security Payload known as protocol 50) authentication will work fine. At least one IPSec session will work through the Router; however, simultaneous IPSec sessions may be possible, depending on the specifics of your VPNs.

VPNs that use IPSec and AH (Authentication Header known as protocol 51) are incompatible with the Router. AH has limitations due to occasional incompatibility with the NAT standard.

Change the IP address for the Router to another subnet to avoid a conflict between the VPN IP address and your local IP address. For example, if your VPN server assigns an IP address 192.168.1.X (X is a number from 1 to 254) and your local LAN IP address is 192.168.1.X (X is the same number used in the VPN IP address), the Router will have difficulties routing information to the right location. If you change the Router’s IP address to 192.168.2.1, that should solve the problem. Change the Router’s IP address through the Basic Setup tab of the Web-based Utility. If you assigned a static IP address to any computer or network device on the network, you need to change its IP address accordingly to 192.168.2.Y (Y being any number from 1 to 254). Note that each IP address must be unique within the network.

Your VPN may require port 500/UDP packets to be passed to the computer that is connecting to the IPSec server. Refer to “Problem #7, I need to set up online game hosting or use other Internet applications” for details.

Check the Linksys website at www.linksys.com for more information.

6.I need to set up a server behind my Router.

To use a server like a web, ftp, or mail server, you need to know the respective port numbers they are using. For example, port 80 (HTTP) is used for web; port 21 (FTP) is used for FTP, and port 25 (SMTP outgoing) and port 110 (POP3 incoming) are used for the mail server. You can get more information by viewing the

Appendix A: Troubleshooting

89

Common Problems and Solutions

Page 96 Page 98
Page 97
Image 97
Linksys WRVS4400N Am not able to access the Router’s Web-based Utility Setup, Need to set up a server behind my Router
Page 96 Page 98

WRVS4400N specifications

The Linksys WRVS4400N is a versatile and powerful wireless router designed to cater to the needs of both small businesses and home users. Combining advanced security features with high-speed networking capabilities, this device stands out in a crowded market.

One of the key features of the WRVS4400N is its support for simultaneous dual-band wireless networking. It operates on both the 2.4 GHz and 5 GHz frequency bands, allowing users to enjoy faster data transfer rates while minimizing interference from other devices. The router supports the 802.11n wireless standard, which can deliver speeds of up to 300 Mbps, ensuring smooth streaming, gaming, and internet usage without disruptions.

Security is a top priority for the WRVS4400N, as it comes equipped with robust firewall protection and the latest encryption technologies. It supports both WPA and WPA2 wireless security protocols, providing users with peace of mind knowing that their data is safeguarded against potential threats. Additionally, the router features a built-in VPN that allows secure remote access to the network, making it ideal for businesses with employees who work from home or on the go.

Another notable characteristic is its four Gigabit Ethernet ports for wired connections. These ports enable users to connect devices directly to the router, benefiting from high-speed, stable connections ideal for bandwidth-heavy tasks. The WRVS4400N also includes a USB port that allows for the easily connected sharing of printers and storage devices across the network.

The router's user interface is user-friendly, making setup and configuration straightforward even for those who are not tech-savvy. Linksys also offers firmware updates to ensure the router remains secure and performs optimally over time.

In summary, the Linksys WRVS4400N is a feature-rich wireless router that combines performance, security, and versatility. With its dual-band capabilities, robust security protocols, and wired connectivity options, it is an appropriate choice for users looking to enhance their home or small business networks.
Top Page Image Contents