Manuals / Linksys / Computer Equipment / Network Router

Linksys WRVS4400N manual IPv4, Server Settings Dhcp

Models: WRVS4400N

1 134
Download 134 pages 37.56 Kb
Page 40
Image 40

Wireless-N Gigabit Security Router with VPN

LAN

The LAN Setup section allows you to change the Router’s local network settings for the four Ethernet ports.

IPv4

The Router’s Local IPv4 Address and Subnet Mask are shown here. In most cases, you can keep the defaults.

Local IP Address. Enter the IPv4 address on the LAN side. The default value is 192.168.1.1.

Subnet Mask. Select the subnet mask from the drop-down menu. The default value is 255.255.255.0.

Server Settings (DHCP)

The Router can be used as your network’s DHCP (Dynamic Host Configuration Protocol) server, which automatically assigns an IP address to each PC on your network. Unless you already have one, it is highly recommended that you leave the Router enabled as a DHCP server.

DHCP Server. DHCP is enabled by default. If you already have a DHCP server on your network, or you don't want a DHCP server, then select Disabled (no other DHCP features will be available). If you already have a DHCP server on your network, and you want the Router to act as a Relay for that DHCP Server, select DHCP Relay, then enter the DHCP Server IP Address.

Starting IP Address. Enter a value for the DHCP server to start with when issuing IP addresses. This value will automatically follow your local IP address settings. Normally, you assign the first IP address for the Router (e.g. 192.168.1.1) so that you can assign an IP address to other devices starting from the 2nd IP address (e.g.

192.168.1.2). The last address in the subnet is for subnet broadcast (e.g. 192.168.1.255) so that the address cannot be assigned to any host.

Maximum Number of DHCP Users. Enter the maximum number of PCs that you want the DHCP server to assign IP addresses to. This number cannot be greater than the available host addresses in the subnet (e.g. 253 for /24 subnet). In order to determine the DHCP IP Address range, add the starting IP address (e.g., 100) to the number of DHCP users.

Client Lease Time. This is the amount of time a DHCP client can keep the assigned IP address before it sends a renewal request to the DHCP server. The default value is 0, which actually means one day.

Static DNS 1-3. If applicable, enter the IP address(es) of your DNS server(s).

Chapter 6: Setting Up and Configuring the Router

Figure 6-11: Setup - LAN

32

Setup Tab

Page 39 Page 41
Page 40
Image 40
Linksys WRVS4400N manual IPv4, Server Settings Dhcp
Page 39 Page 41

WRVS4400N specifications

The Linksys WRVS4400N is a versatile and powerful wireless router designed to cater to the needs of both small businesses and home users. Combining advanced security features with high-speed networking capabilities, this device stands out in a crowded market.

One of the key features of the WRVS4400N is its support for simultaneous dual-band wireless networking. It operates on both the 2.4 GHz and 5 GHz frequency bands, allowing users to enjoy faster data transfer rates while minimizing interference from other devices. The router supports the 802.11n wireless standard, which can deliver speeds of up to 300 Mbps, ensuring smooth streaming, gaming, and internet usage without disruptions.

Security is a top priority for the WRVS4400N, as it comes equipped with robust firewall protection and the latest encryption technologies. It supports both WPA and WPA2 wireless security protocols, providing users with peace of mind knowing that their data is safeguarded against potential threats. Additionally, the router features a built-in VPN that allows secure remote access to the network, making it ideal for businesses with employees who work from home or on the go.

Another notable characteristic is its four Gigabit Ethernet ports for wired connections. These ports enable users to connect devices directly to the router, benefiting from high-speed, stable connections ideal for bandwidth-heavy tasks. The WRVS4400N also includes a USB port that allows for the easily connected sharing of printers and storage devices across the network.

The router's user interface is user-friendly, making setup and configuration straightforward even for those who are not tech-savvy. Linksys also offers firmware updates to ensure the router remains secure and performs optimally over time.

In summary, the Linksys WRVS4400N is a feature-rich wireless router that combines performance, security, and versatility. With its dual-band capabilities, robust security protocols, and wired connectivity options, it is an appropriate choice for users looking to enhance their home or small business networks.