GW-200 User Manual

￿vad: Enable/disable VAD (voice activity detection).

￿agc: Check for enable the Auto Gain Coctrol.

￿aec: Check for enable Auto Echo Cancellation.

￿codec1: Set the priority 1of the audio compression algorithm. The

options are g729 g7231 g711u g711a and gsm.

￿codec2: Set the priority of the audio compression algorithm. The

options are g729 g7231 g711u g711a and gsm.

￿codec3: Set the priority 3of the audio compression algorithm. The

options are g729 g7231 g711u g711a and gsm.

￿codec4: Set the priority 4of the audio compression algorithm. The

options are g729 g7231 g711u g711a and gsm.

￿codec5: Set the priority 5of the audio compression algorithm. The

options are g729 g7231 g711u g711a and gsm.

￿g.723.1 high rate: enable/disable g.723.1 high rate. G.723.1 high rate is 6.3kbps, low rate is 5.3kbps.

￿audio frame: Set audio frames in RTP package. Minimum is 1 and maximum is 8.

￿handset in: Drag the slider to adjust the volume of handset input. Drag it to the left to reduce the volume; while drag it to the right to increase the volume.

￿handset out: Drag the slider to adjust the volume of handset output.

￿speaker out: This setting no needed to set at this moment.

Other settings:

18

Page 18
Image 18
Perfectone Net Ware GW-200 manual Options are g729 g7231 g711u g711a and gsm, Other settings