DHCP addressing, the gateway’s LAN parameters will automatically be configured as soon as it is connected to the LAN or router and powered up; 2: use PPPoE mode. Those ADSL and Cable Modem users please select this item for it is a protocol especially designed for them. With this system, ADSL ISP automatically assigns all the required IP parameters to any device connected to it when the device log on; 3: use modem mode. Those who use gateway with modem, please set the value as 3.
set pppid XXX
With iptype set as 2, use this command to set ADSL ID; with iptype set as 3, use this command to set Modem ID.
set ppppin XXX
With iptype set as 2, use this command to set ADSL pin; with
iptype set as 3, use this command to set Modem pin.
set ip XXX.XXX.XXX.XXX
With iptype set as 0, use this command to set IP address of
gateway .
set subnetmask XXX.XXX.XXX.XXX
With iptype set as 0, use this command to set subnet mask of
gateway.
set router XXX.XXX.XXX.XXX
With iptype set as 0, use this command to set router IP of network
26
