IPN: Use IPN’s system
Yiyang: Use Yiyang’s | system |
Thinker: Use Thinker’s | system |
Suntek: Use Suntek’s | system |
service addr, service id: Please put the URI (domain name/IP address) of the server into “service addr”.
If “use service” is checked, please put the URI of gatekeeper into “service addr” .The default service port is 1719. If the gatekeeper has a GKID, please put it into “service id”.
If “use service” is not checked, to make calls through gateway, please put the URI of the gateway into “service addr”. To make
nat traversal: When the gateway with private IP address need communicate with other IP phones in a different LAN or on Internet, please select an item from dropdown list to set the proxy used by the gateway.
disable: Select this item when the log in server and gateway in the same LAN, or the log in system supports the gateway working behind the LAN.
enable: When the system does not support gaeway working behind the LAN, please select this item to search public IP address of the NAT device. With this item selected, “nat addr” field will be activated. Besides, port mapping (port forwarding) needs to be properly set up on NAT device.
citron: With Citron private protocol used, select this item to fit into the GnuGK system transferring the voice and signal by router.
auvtech: Select this item with Auvtech private system used.
vida: Select this item with Vida private system used.
aivgr: Select this item with aivgr private system used.
nat addr: When “nat traversal” is set to “enable”, please put the
12
