Perfectone Net Ware GW-200 Gateway Telnet Commands Explanation, Command Function, Set, Load

GW-200 User Manual

P:\>

If you type super password, then you will see:

Password : ********

P:\>

Above information indicates that gateway is under setting mode, and then you can set the GW-200 gateway by using the telnet commands.

￿￿GW-200 Gateway Telnet Commands Explanation

GW-200 gateway Telnet Commands

Command	Function
?	Supply command name and parameters
get	Display basic parameters of the GW-200 gateway
set	Set parameters of the GW-200 gateway
store	Save current settings to designated position
load	Load designated settings to current position
exit	Exit from the setting mode without saving the configuration
write	Exit with saving all configurations and restart GW-200 gateway
ping	Ping other net parameter
ftp	The gateway connects to FTP server and then get the files

Detail description of GW-200 Telnet commands

Command ?

Syntax description: No optional parameter

Usage: Type command name and parameters following P:\> . Be used

as the keyword to supply keyword and parameters of the relevant

commands.

Relevant usage: None

22