Perfectone Net Ware GW-200 manual Hardware, Software

GW-200 User Manual

gateway has finished rebooting, it will be in static IP mode. Then you pick up the phone again, press 1234 192*168*1*100, then press the “IP/SET” key on GW-200 and hang up the phone. Gateway will reboot again. Now the phone’s IP address is 192.168.1.100, if you want to check it, please refer to the item 1.

Features

Hardware

￿Main chip—pa1688 50MHz

￿Data Memory—2MB SDRAM

￿Program Memory—1 MB Flash memory

￿Ethernet Jack—10/100M jacks

￿ AC/DC adapter—Input AC 230V or 120V Output 9V DC, 500mA

Software

￿DHCP support for LAN or Cable modem

￿PPPoE support for ADSL or Cable modem

￿Set phone by HTTP web browser (IE6.0) or Telnet

￿Upgrade by FTP

￿Support major G.7XX and gsm610 audio codec

￿VAD(Voice Active Detect)

￿CNG (Comfort Noise Generation)

￿Dynamic voice jitter buffer

￿G.168/165 compliant 16ms echo cancellation

￿Tone generation and Local DTMF re-generation according with ITU-T

￿E.164 dial plan and customized dial rules

￿Voice prompt

￿Hotline

Standard and Protocol

GW-200 supports following standard and protocol:

￿IEEE 802.3 /802.3 u 10 Base T / 100Base TX

￿Major G.7XX and gsm610 audio codec

4