20
SWITCH ON | SRC- |
POWER |
|
""""
RENAME
SOURCE cd 1
RENAME
SOURCE cd 1
SRC-
The procedure for configuring sources is described in the following sections.
To start configuring inputs
Switch off the KOLEKTOR using the power switch on the front panel.
Press and hold down SRC- (front panel) and switch on the power again.
Keep SRC- held down until the progress bar display is complete, and the display shows Sources.
The display will then change to show the source assigned to line input 1.
Note that if you turn off the power while you are naming sources any changes you have made will be ignored, and the previous assignment of names to inputs will be retained.
To select the input to rename
Press SRC- (front panel or handset).
RENAME
SOURCE tu 2