Manuals / Linn / Home Audio / Stereo Amplifier

Linn Kolektor owner manual User options, initial value is shown underlined

Models: Kolektor

1 48

Download 48 pages 34.4 Kb

Page 34

User options

24

User options

The following table lists the user options provided. In each case the

initial value is shown underlined.


	Number	Name	Description	Values

	U1	Default Volume	The default volume setting on power up.	0	= Volume 15
			Ignored if U5 is enabled.	1	= Volume 30

	U2	Enable Sleep	Defines the sleep display after 20 seconds.	0	= Disabled
		Mode		1	= Enabled “ – –”
				2	= Enabled “…”

	U3	Auto-Memory	If disabled, the current volume, bass, treble,	0	= Disabled
		(while power is on)	and balance settings are used for all sources.	1	= Enabled
			If enabled, the volume, bass, treble, and
			balance settings are retained for each
			individual source.

	U4	Auto-Listen Source	If enabled, the tuner or CD player source is	0	= Disabled
			selected on a tuner or CD player handset	1	= Enabled
			command.

	U5	Retain User	If disabled, then on power up the volume,	0	= Disabled
		Amplifier Settings	balance, bass, and treble settings for each	1	= Enabled
		(on power up)	source are set to the power down values.
			If enabled, then on power up the volume,
			balance, bass, and treble settings for each
			source are restored to their individual
			previous values. The volume is limited to 30.
			Overrides U1.

	U6	Enable IR Control	Enables/disables infra-red control of the	0	= Disabled
			product.	1	= Enabled

Image 34

Linn Kolektor owner manual User options, initial value is shown underlined

Contents

LINN KOLEKTOR P R E A M P L I F I E R O W N E R S M A N U A LPage Important safety information MAINS PLUGSGENERAL SAFETY INSTRUCTIONS Mains plug replacement Replacing the fuseDate of issue CE Declaration of ConformityFCC notice Date of issueIntroduction ContentsMaintenance UnpackingTechnical information SpecificationsIndex Copyright and acknowledgements viii With the Linn KOLEKTOR IntroductionL i n n K O L E K T O R you will hear the sources inYour Linn KOLEKTOR Audio moduleControl module Interface module Special features of the KOLEKTORIndependent source settings Bass and treble controlsUser options Configurable source namesRecording lock Intelligent operation with other Linn productsUnpacking Setting up the KOLEKTORReplacing the fuses Positioning the KOLEKTORLocating the KOLEKTOR for use with the handset Connecting the KOLEKTOR Connecting the sourcesConnecting to a power amplifier Connecting a phono sourceConnecting a tape recorder Connecting headphonesConnecting the mains supply suitable power outletUsing the KOLEKTOR Using the front paneltu 2 LOCK Using the handset LINNTo switch on Switching on and offSelecting a source To select a source Changing the volumeTo select a source directly from the handset ~4 To change the volumeChanging the balance To mute the sound~9 Changing the bass and treble9~ To change the bass or trebleTo cancel a recording To set up a recordingRecording a source Customising the KOLEKTOR Configuring the inputsUsing a moving magnet phono source Removing inputsTo start configuring inputs To select the input to renameTo save the new input names To change the user options Changing user optionsTo choose a specific user option To save the user options User options initial value is shown underlinedRC5 Amplifier To reset the KOLEKTOR Factory default settingsinit Poor response to handset commands Troubleshooting and maintenanceTroubleshooting There is no sound from the speakersCleaning Maintenancecommands Technical supportAmerica General SpecificationsTechnical information Audiohandset headphones, connecting factory default settings 26 front panelfuse replacement Linn Interconnect cables LOCK indicatorMUTE indicator connectingmaintenance power amplifier, connectinguser options continued volume, changingunpacking user options VOL- and VOL+ keys 12, voltage selectionPage Page Page Page LI N N PACK