USING MENUS
MAKING SELECTIONS
>A This pointer shows the currently
Bselected item
C
The BACK button returns to a previous
BACK menu without changing the selection
USING THE MENUS
MENU TYPES
System Startup Settings - determines the type of system. For example,
the system is a hot water heating system with
Set Point/Gain/Lead Stage Settings - These settings might need occasional adjustment by operating personnel. These are the only settings which may require changes after the Harmony has been successfully initialized for your specific type of system.
ADJUST
PRESS TO
SELECT
ADJUST
PRESS TO
SELECT
Pressing
The ADJUST/SELECT knob saves the selection to memory and returns to a previous menu
Rotating
The ADJUST/SELECT knob moves the pointer up and down selections
Stage Settings - determine how the individual Stage outputs are controlled. When installing the panel, each Stage must be set correctly, or the Harmony either will not control the Stage or will control them erratically.
System Settings - determine how the system will operate. These are general settings which affect all Stages. The default settings will generally work in most applications, but adjustments should be made to
MENU BASICS
Example: CHANGING VALUES
1.0 min
The Purge Delay is currently 1 minute
The BACK button returns to a previous
BACK menu without changing the value
ADJUST | Rotating |
| The ADJUST/SELECT knob |
PRESS TO | changes the value - this is |
indicated by a pointer from the | |
SELECT | old value to a new value |
| 1.0 min |
The screen shows the old and new value | |
ADJUST | Pressing |
| The ADJUST/SELECT knob |
PRESS TO | saves the new value (2.0 min) to |
memory and returns to a | |
SELECT | previous menu |
The BACK button returns to a previous | |
BACK | menu without changing the value |
•The menus are in English and will guide you through the settings.
•To change a selection, rotate the black knob marked ADJUST and PRESS TO SELECT (ADJUST/SELECT). Rotating the knob clock- wise will move down the list of possible selections. Rotating the knob counterclockwise will move up the list.
•A pointer in front of a menu line indicates that it is the one currently selected.
•When the pointer is on the same line as the item to be selected, press the black ADJUST/SELECT knob. This will either save the selection, or bring up a new screen to make further changes to that menu item.
•The BACK button will return you to the previous screen without saving any changes made.
CHANGING SETTINGS
•Some settings require a number, such as time or temperature to be adjusted.
•These screens will be indicated with the title on top and then the current numerical value for that setting.
•To change a selection, rotate the ADJUST/SELECT knob. Rotating the knob will cause a pointer to appear. Both the old and new value will be displayed.
•The BACK button will return you to the previous screen without saving any changes made.
•When the new value (the one being pointed to) is correct, press the ADJUST/SELECT knob. This will save the selection to memory and return you to the previous menu.
10
