Self Test...
Test Passed
Initializing...
Lochinvar
Harmony v X.XX
Initialization
Please wait...
INITIALIZING
PERMANENT STORAGE
AREA
Please wait...
SELECT
to continue
SYSTEM STARTUP
STARTUP SEQUENCE
•The series of initialization screens appears on the left. The Harmony will automatically step through the screens.
•When powered, the Harmony performs a self test on its compo- nents.
•After the self test diagnostics have been successfully completed, the Harmony will initialize the panel.
•On the first powerup, the System Startup screen will appear after the initialization is complete. If it doesn't, the Harmony has already been configured. To check the configuration, or to make changes, follow the procedure on pg. 28 to bring up the System Startup screens.
•The System Startup menu determines the sensors, the type of output, the operating mode, and the modulating mode.
•Press the ADJUST/SELECT knob once to begin setting up the panel.
SYSTEM STARTUP
>°F
°C
°F
>°C
°F
>°C
°F
°C
Reset °F
Reset °C
ADJUST | Press to |
| select |
PRESS TO SELECT | °F |
| |
ADJUST | or turn |
| to scroll |
PRESS TO SELECT | down |
ADJUST | Press to |
| select |
PRESS TO SELECT | new |
All Sensor
Type options
SELECTING THE SENSOR TYPE
Check the installation and which sensor was installed
Temperature Set Point Mode | Default - °F |
•The same temperature sensor can display either in °F or °C.
•If °F is selected, all temperatures and settings will be displayed in degrees Fahrenheit.
•If °C is selected, all temperatures and settings will be displayed in degrees Celsius.
Reset Mode (Reset °F or Reset °C)
•Reset mode is only available if an outdoor sensor is connected to terminals A11 and A12. DO NOT select Reset °F or Reset °C without an outdoor sensor.
•The same outdoor sensor can display either in °F or °C.
•If Reset °F is selected, all temperatures and settings will be dis- played in degrees Fahrenheit.
•If Reset °C is selected, all temperatures and settings will be dis- played in degrees Celsius.
•For information on how to configure the Reset, see pg. 25.
11
