>NORMAL PROCESS
NORMAL
>PROCESS
NORMAL
>PROCESS
ADJUST
PRESS TO SELECT
ADJUST
PRESS TO SELECT
ADJUST
PRESS TO SELECT
Press to
select
Normal
or turn
to scroll
down
Press to
select
Process
SELECTING THE OPERATING MODE
Default - Normal
•Most heating applications do not experience rapid changes in system temperature. For these systems, it is best to adjust the modulation based on the rate of system rise or fall. This PID type of algorithm will help to prevent short cycling of the stages, reduce thermal stress on the system, and maintain an accurate system temperature. If your equipment is of this type, select Normal.
•Systems that run for process may experience large changes in load almost instantaneously. In Process mode, the Harmony will react immediately to load changes. Large load changes may cause stages to be short cycled, as the Harmony can enable and disable stages within seconds.
After making this selection, the main display screen will be displayed.
SYSTEM STARTUP
13
