What to do, if ...
Problem | Possible cause | Remedy | ||
|
|
| ||
The “Recording” menu point is not displayed in the | No video or DVD recorder logged in. | Log in the video or DVD recorder in the connection | ||
TV menu. |
|
| wizard and connect the device. | |
|
|
| ||
“Connections” cannot be called in the TV menu | A time recording is in progress. | Wait until the timer recording has ended or delete the | ||
(deactivated) |
|
| timer. | |
|
|
|
|
|
The control of the Loewe video recorder and the | a) | The Digital Link function is not activated or not | a) | Activate Digital Link in the recorder (see operating |
timer do not work or do not work properly. |
| possible in the recorder. |
| instructions of the video recorder). |
| b) | b) | Connect the | |
| c) | Recorder is not logged in. | c) | Log in recorder. |
|
|
|
|
|
General problems with connecting external | a) | The device is not logged in to the connection | a) | In the connection wizard (TV menu – |
equipment via an AV input. |
| wizard or is connected differently than is shown |
| Connections – New devices/modifications), |
|
| in the connection diagram. |
| compare the connection diagram with the actual |
|
|
|
| installation and connect as shown, if necessary. |
| b) | The AV norm is set incorrectly. | b) | Set the norm correctly. |
| c) | The AV signal is set incorrectly. | c) | Set the AV signal correctly. |
|
|
| If “Automatic” is set for AV norm or AV signal, this | |
|
|
| can lead to errors for signals which do not conform | |
|
|
| to the norm. Then the norm and the signal are to be | |
|
|
| set according to the specifications in the operating | |
|
|
| instructions of the external device. | |
|
|
|
|
|
A decoder connection does not function or is faulty. | a) | The signal is not decoded because the wrong | a) | Follow the instructions in the connection wizard |
|
| decoder stations are selected in the connection |
| again (TV menu – Connections – New devices/ |
|
| wizard. |
| modifications) and select the corresponding |
|
|
|
| decoder station. |
| b) | The sound is missing in decoder mode because | b) | Follow the instructions in the connection wizard |
|
| the wrong decoder sound is assigned in the |
| again and select the right audio source (decoder, |
|
| connection wizard. |
| TV or autom.), see instructions of the decoder. |
|
|
| ||
All menus appear in the wrong language. | Menu language has been set incorrectly. | Set your menu language: | ||
|
|
| Press the INFO button in TV mode (index). Select the | |
|
|
| first index item and call it by using OK. Then select | |
|
|
| the language and confirm with OK. | |
|
|
|
|
|
- 40
