Operating additional equipment
Sound from PC or Set Top Box
Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers.
If you have connected a digital external audio amplifier, you can select the digital audio signal in the connection wizard (TV menu - Connections - New devices/modifications) and assign it to the VGA/XGA socket. You can make the other settings for the audio amplifier as described for digital amplifiers on page
34.The digital audio signal of the Set Top Box is fed in at the AUDIO DIGITAL IN socket on the TV. Feed the digital audio signal from the TV AUDIO DIGITAL OUT to the amplifier.
Component video connection
If you have a DVD player/recorder with Component OUT connections, you can connect it to the
IN sockets of the TV instead of to the
information. The playback is of a better quality than via the
If you want to use the digital sound of the DVD player with a digital audio amplifier connected to the TV, make a connection between AUDIO DIG OUT of the DVD player and AUDIO DIGITAL IN of the TV set.
Log in the component/device in the connection wizard:
Assign the AUDIO DIG IN input here to the COMP. IN socket, provided a digital audio amplifier is also connected. You can make the other settings for the audio amplifier as described for digital amplifiers on page 34.
Set the signal at the component input in the connection wizard: Set to “Automatic“ first. If the signal is not reproduced when playback is started, consult the operating instructions of the DVD device connected to find out what screen resolution is possible (SDTV, HDTV or ProScan).
Select the component connection in the AV selection.
AV Call AV selection
AV selection |
|
|
DMI/DVI COMP. IN | OK | VIDEO VCR DVD AVS VGA HDMI/DV |
OKSelect COMP. IN sockets and use ...
OK | to call. |
Start playback on the connected device.
Set geometry and colour standard: as described for the VGA/XGA connection.
- 36
