Assignment of digital audio inputs and outputs | Loewe 23332507.020

Operating additional equipment

Assignment of digital audio inputs and outputs

Audio input “AUDIO DIGITAL IN”

The TV set has a coaxial digital audio input “AUDIO DIGITAL IN” and a coaxial digital audio output “AUDIO DIGITAL OUT”. If you are using an external digital surround ampliﬁer for sound reproduction, you have to feed digital audio signals to the TV, e.g. from the DVD player.

	AUDIO
	DIGITAL
AV2	IN	OUT

Audio output “AUDIO DIGITAL OUT“

The digital audio signal is applied at the “AUDIO DIGITAL OUT” socket of the TV. For example, you can connect an external digital audio ampliﬁer or the Loewe Auro system here.

An analogue audio signal from the TV set or another sound source which is received at one of the Euro-AV sockets of the TV set is converted into a digital signal (PCM) and output at the “AUDIO DIGITAL OUT“ socket. Conversion from external analogue AV sources to PCM is not possible if the TV’s loudspeakers are used as a centre channel. In this case, connect your audio ampliﬁer additionally to the TV (AUDIO OUT L/R) with a cinch cable and switch the audio ampliﬁer to analogue audio input.

The digital TV sound or the digital sound of a connected auxiliary device is only audible via an external digital audio ampliﬁer (e.g. Loewe Auro system).

MAINS

DVD

		MULTICHANNEL AUDIO OUT						I
		LEFT	CENTER	LEFT				AUX-I/O
		REAR		FRONT
DIGITAL AUDIO OUT					STEREO OUT		VIDEO OUT
								II
								TO TV-I/O
	DIG OUT	RIGHT	SUBW.	RIGHT	R	L	(CVBS)	(Y/C)
OPT OUT	DIG OUT	REAR		FRONT		AUDIO	VIDEO OUT	S-VIDEO OUT

Surround Amplifier

	PREOUT		AUX1 IN AUX OUT AUX 2
FL	C	FR	L	L
				DIGITAL
				IN
				DIGITAL
				OUT
SL	SUB	SR	R	R

Connect the output socket of the DVD player (DIG OUT) to the TV‘s “AUDIO DIGITAL IN” socket with a cinch cable.

In the connection wizard, specify that audio transmission is to be digital. Specify that the digital sound is to be assigned for example to the Euro-AV socket 2 to feed the digital sound to the digital audio output of the TV set and via this to the external audio ampliﬁer. Further information about this can be found on page 34.

- 32

Image 32

Loewe 23332507.020 manual Assignment of digital audio inputs and outputs, Audio input Audio Digital

Contents

Operating instructions Contents Open index Remote control TV functionsDigital Recorder Control units Display red = standby green = operationOnly for sets with a Digital Recorder Call the menu Menu up Station up Menu right Connections to rear panel Audio input left Welcome Cleaning DisposalPacking and box Set For your safety 10 cm Connection First installationRemote control Using the common interface module Switching onHandling the fabric hose Use of the binders Automatic programming Station sorting First installation Daily operation Switching on/offDirecting DVB-T antenna Select a TV channel With the P+/P- buttons on the remote control With the numeric buttons of the remote controlChanging stations Via the station list Basics about the menu operation Example of the menu operation OKSelect Settings For the info system This is how to select the index item For the indexControl like on a mobile phone keypad Use To go to the previous/next letter Direct control on TV set Setting the soundPicture settings How the coloured keys work in TV mode Operating modes TVShow status display Calling the index Call timer overview Under Settings you will ﬁnd the following functionsCall additional functions Select picture format DVB subtitles Installing new DVB software Removing the CI moduleInserting a new CI module Calling the CI module menu Image+ menu Image+ demo modeImage+ Operating modes PIP Picture in picture PIP Setting the PIP type Switch to small PIPFunctions in the PIP menu Position of the PIP picture Using the EPG Mark this by using OKOperating modes EPG EPG Programme guide Switch on TV when marked Programming recording for recordersEPG menu Selecting providers and stations Operating modes Teletext Analogue TeletextSelection with the coloured keys Displaying teletext pages Programme timer recordings Teletext menuDigital teletext operation only for UK device version Menu Display teletext menu Operating modes Radio RadioRadio menu EPG Programme guide Operating additional equipment Login and connect equipmentConnecting video/DVD recorders Video playback Calling AV input via the station listCalling AV inputs in the AV selection AV Call AV selection Now you will see the playback from the connected AV device Audio output Audio Digital OUT Assignment of digital audio inputs and outputsAudio input Audio Digital Only required for TV as centre loud speaker Digital audioComponent Video EURO-AV cable Link cable Connecting other audio ampliﬁers or active speakers Sound menu using the button, select Sound via and then TV Setting colour standard Hdmi DVI connectionVGA/XGA connection Set geometry Component video connection Sound from PC or Set Top BoxLog in the component/device in the connection wizard OKSelect COMP. in sockets and use Setting the remote control using code entry Using the RC3 remote control to operate a VCR Functions for Loewe VCR VV 8106, 8136 Rotating the TV set Setting the position of the TV set when switched offSelect Settings Problem Possible cause Remedy What to do, if Wired Digital Link Plus does not functionReplace the Euro-AV cable That they fall between 1 Technical data General data Electrical data Connections Accessories Service Addresses Switzerland Codelist RC3 / Lista de códigos RC3 Loewe VCR SAT /STB SAT Cable Box STB TPS