Optional Equipment | 35 |
Pedestal (Part # 99200101)
If using outside air with the pedestal, follow the directions below under "Using Outside Air with the Pedestal" prior to installing the pedestal
Attachment Bolts and
Washers - use a 9/16"
socket wrench to 
attach the pedestal to
the stove.
Optional Air Intake Port
If installing in a mobile home, insert the lag bolts through these holes and screw them into the floor with a 1/2" socket wrench
| 22” |
| When attached, the face of the |
|
|
23 5/8” | stove is 2 1/2” in front of the front |
| |
| edge of the pedestal. |
OUTSIDE AIR EQUIPMENT (wood stoves only)
Insulation is | Staples are used to attach | The cover plate | |
Screen is used | may be discarded. | ||
| |||
used to seal the | the screen to the floor. | ||
to prevent |
| ||
|
| ||
side edges of | rodents from |
| |
|
| ||
the pedestal . | entering. |
| |
|
|
Using Outside Air with the Pedestal
Before installing, check the section "Outside Air Requirements" 11 for installation concerns.
1.Determine the location of the outside air hole penetrating the floor (& hearth). The illustration above details the size of pedestal and its location in relation to the stove. The hole may be cut anywhere underneath the pedestal, as long as it is not within 2" of the outside perimeter of the pedestal, is at least 16 square inches in area, and does not interfere with structural members of the home. Place the rodent screen over the hole (above or below) and secure with staples.
2.Attach the stove to the pedestal with the included bolts. Tuck the included insulation underneath the side edges of pedestal to seal off any air from entering underneath the pedestal.
© Travis Industries | 4040608 |
