Optional Equipment

33

Front Blower (part # 99000133)

To Switch The Power Cord To The Left Side:

Use a pair of pliers to disconnect the strain relief which holds the power cord in place. With the power cord slackened, the molex connectors that attach the power cord to the blower assembly may be disconnected. Pry the button plug from the left side of the blower assembly and insert it into the hole on the right side. Pull the left side molex connector out from behind the deflection plate and cut the nylon tie that holds the wire back. Insert the molex connector on the power cord through the hole on the left side of the blower assembly and attach it to the left side molex connector. Route the wire directly behind the blower cage. Place the strain relief over the power cord (it should be in the same location on the power cord that it was before – approximately 2" from where the wires split). Insert the strain relief into the hole on the left side until the strain relief locks in place. Make sure the power cord, wires, or molex assembly do not protrude into the opening of the blower.

The wires tuck in here, directly behind the blower cage.

Remove the strain relief by

squeezing it from the top and bottom

with a pair of slip-joint pliers.

Disconnect the molex plug inside the blower assembly. Remove the power cord by pulling it out of the hole exposed by removing the strain relief.

Left Side of

Blower

Assembly

Remove the button plug from the

left side and insert it into the hole

on the right side.

Installation Instructions

1.Remove the two screws above the air control and beneath the ashlip. Place the blower assembly underneath the ashlip and replace removed the two screws. Before tightening the screws with a 3/8" nutdriver, lift the blower up so it tucks underneath the ashlip.

Remove the two screws here

3/8" Nutdriver

Use a 3/8" nutdriver to replace the two screws and hold the front blower to the appliance.

Plug the blower into a 110 volt grounded outlet.

Control Box

2. Plug the power cord running from the control box into a grounded 110 volt electrical outlet.

© Travis Industries

100-01165

4040806

Page 32 Page 34
Page 33
Image 33
Lopi Revere owner manual Front Blower, To Switch The Power Cord To The Left Side
Page 32 Page 34

Revere specifications

The Lopi Revere is a highly efficient and stylish wood stove that stands out in the market for its superb heating capabilities and modern design. Ideal for both residential and commercial settings, the Revere model seamlessly combines traditional wood-burning aesthetics with cutting-edge technology to deliver an optimal heating experience.

One of the main features of the Lopi Revere is its impressive heat output. The stove produces up to 75,000 BTUs, making it suitable for heating spaces ranging from 1,000 to 2,500 square feet. This makes the Revere an excellent choice for those living in larger homes or those seeking to create a cozy atmosphere in expansive living areas. The extended burn time of up to 12 hours on a single load of wood ensures that users can enjoy prolonged warmth without the hassle of constant reloading.

The Lopi Revere is constructed from high-quality materials, ensuring durability and longevity. The heavy-duty steel body not only adds to the aesthetic appeal but also enhances heat retention and distribution. Additionally, its ceramic glass door allows users to enjoy a captivating view of the flames while maintaining safety and efficiency. The large firebox can accommodate logs up to 20 inches, providing ample room for longer burn times.

Equipped with advanced combustion technology, the Lopi Revere ensures a clean and efficient burn. The stove features a secondary combustion system that maximizes heat output while minimizing emissions. By utilizing a combination of primary and secondary air controls, the Revere achieves optimal airflow, resulting in a cleaner burn that is more environmentally friendly.

Another characteristic that sets the Lopi Revere apart is its ease of use. The simple, adjustable air intake and ash removal system allow for seamless operation and maintenance. Users can easily regulate the heat output and control the burn rate according to their specific heating needs.

With its versatile design, the Lopi Revere is available in several finishes, including classic black and modern painted options, allowing homeowners to match the stove to their interior style. Whether positioned in a rustic cabin or a contemporary home, the Lopi Revere adds both functionality and aesthetic value.

In summary, the Lopi Revere is a modern wood stove that brings together efficiency, style, and advanced technology, making it an outstanding choice for anyone looking to enhance their home heating experience.
Top Page Image Contents