26 | Maintaining Your Appliance |
Baffle Removal & Replacement
1Push the front firebricks up and feed them forward, guiding them out the door. Repeat for the rear firebricks.
Bypass Rod (& Yoke)
Front Baffle Support | Baffle Firebrick |
|
| Bypass Damper |
Front Air Tube | Bypass Support |
| |
| Bypass Gasket |
Support Tabs | Center Baffle Support |
2The baffle supports rest on support tabs.
3The bypass support and damper are difficult to remove and should only be removed if necessary. Remove the rear secondary air tube (see the following section for instructions). Slide the bypass support forward until the bypass rod can be disconnected from the bypass damper. Slide the damper forward and remove. The bypass support is removed by sliding it forward and rotating it downwards (the bypass holder fits very snug inside the firebox and is very heavy, making it difficult to remove). The bypass gasket rests on the side and rear air channels. Try not to damage it when removing the bypass holder.
Air Tube Removal & Replacement
Air Tube Collar |
|
Air Tube | Remove the left pin on the air tube collar |
a |
Roll Pin
b Slide the air tube to the left, swing it down and remove from the firebox.
© Travis Industries | 4040806 |
