Recording Mode
Recording Mode
RECORDING MODE:
•Indicates that the camera is recording in ALARM Mode.
•Indicates that the camera is recording in MOTION DETECTION Mode.
•Indicates that the camera is recording in CONTINUOUS Mode.
NOTE: If the power is lost, the DVR will automatically resume the recording schedule after the power is back.
NOTE: The system will stop recording when the following occur:
•No camera video inputs are detected (the cameras are not attached to the system).
•Motion is not detected (when the record mode is set to MOTION).
•When the record schedule is set to Not Record.
•If the HDD is not formatted, or when using the factory defaults after a new HDD is installed.
•When the Overwrite function is OFF, and the HDD full.
•When the system is copying Backup data.
•When the firmware is being updated.
•When the system is in the HDD management section of the Setup Menu.
25
