EXTERNAL DEVICE
EXTERNAL DEVICE
1.TCP/IP SETUP - Configure the system Networking information.
2.PAN/TILT SETUP - Set up the parameters of the PTZ control.
3.SPOT SETUP - SPOT output setup.
4.RS232C SETUP - Set up the parameters of the RS232 port.
TCP/IP SETUP - IP SETUP
1.MAC ADDRESS - Displays the MAC address. MAC address cannot be changed and is unique to each system.
2.DHCP MODE - Set the DHCP mode to Manual or Automatic.
•When DHCP is set to Automatic, the settings will be retrieved from the network router - and settings cannot be changed manually.
•To turn off the DHCP automatic detection, set the DHCP MODE to
DISABLE.
3.IP PORT - Manually Enter an IP Port number. The default port is 50000
4.IP ADDRESS - Manually set the IP address.
5.GATEWAY - Manually set the GATEWAY.
6.SUBNET - Manually set the SUBNET MASK.
TCP/IP SETUP - DDNS SETUP
1.DDNS ENABLE - Turns the DDNS Function ON/OFF.
2.DNS SERVER - Enter the DNS Server’s IP address. Use Mouse Wheel to change the value. The default IP is 202.133.244.128
3.INTERVAL - Set the interval for the system to report its IP address to the DDNS server automatically. (D- day / H- hour / M-
42
