LOREX Technology L19lD1616501 instruction manual Connecting a Slave Spot-OutMonitor - Appendix #3

Connecting a Slave (Spot-Out) Monitor - Appendix #3

Connecting a Slave (Spot-Out) Monitor - Appendix #3

Connections to a Slave Monitor / Spot-Out Monitor (not included with the System) can be made through the MONITOR OUT and/or the SPOT OUT ports on the back of the Observation System. A slave monitor can be a TV or Observation System Monitor.

A Slave Monitor is used as a View Only device. A Slave Monitor can only display camera data as it is sent from the Observation System (based on settings in the Spot Out Menu options).

•MONITOR OUT - Connect the MONITOR OUT port on the back of the Observation System to the VIDEO IN port on the back of the Slave Monitor. This will output all onscreen video to a secondary monitor.

•SPOT OUT - Connect the SPOT OUT port on the back of the Observation System to the VIDEO IN port on the back of the Slave Monitor

NOTE: The Video OUT and Slave out can be used at the same time, however separate monitors will need to be used.

OBSERVATION SYSTEM

SLAVE MONITOR	SPOT OUT
(Not Included)	MONITOR
	(Not Included)

48