EXTERNAL DEVICE
minute). Use the Mouse Wheel to change the value.
4.REGISTER - Connect to the DDNS server and register the system information to the server. Click REGISTER to start the registration.
5.DNS STATUS - Indicates the current status of DDNS connection
•IP ADDRESS: Indicates the current IP address recorded in the server
•IP PORT: Indicates the current IP port recorded in the server.
•REMAIN TIME: Indicates the remaining time until the next connection to the server.
6.LAST REGISTRATION DATE - Displays the time of the last registration.
TCP/IP SETUP - SPEED
Controls the system bandwidth use (network speed). Settings between 1 (low) ~ 9 (high)
PAN/TILT SETUP - COMMAND SETUP
1.CHANNEL - Select the channel for PTZ (PAn/TILT/ZOOM) Camera control. PTZ Camera is not included with the system.
2.MODEL - Select PTZ protocol.
3.PTZ ID - Select PTZ ID.
4.BAUDRATE - Select Baud Rate of PTZ control code.
5.CMD DELAY - Set up a delay time to run the command.
6.COMMAND - Pick up PTZ CMD.
7.LENGTH - Displays the length of PTZ control code.
8.CODE - The control code of PTZ CMD.
43
