109
Setting up Motion Recording - Appendix #9
Motion Area Setup
Use the System menu to configure the
Motion Detection areas.
Setting the motion detection areas are
useful to mask in specific areas (i.e. Doors
or Windows), so when movement is
detected in these areas the System
Recording will begin.
The Motion Mask area can also be set to
remove certain areas which you do not want
to have detect motion, such as a heavy
traffic area, or a piece of machinery which is
in continuous motion.
To change the Motion Detection Area:
• Select the SYSTEM SETUP option to
configure the menu options.
• Select the Camera Setup option:
• Select the Motion Sensor Menu:
• Click on the AREA SETUP for the
desired Camera.
• Use the Mouse to select or deselect
areas for motion detection
• Press the Return Button, or Right Click
to exit. Select to Save Changes & Exit.
Selected Areas are shaded in BLUE.
Deselected Areas are shaded in GREY.