15
Rear Panel
Rear Panel
1. 6 PIN DIN VIDEO INPUTS - Channel 1-4 Camera inputs (for cameras with 6
Pin DIN connections).
Cameras with 6 Pin DIN connections draw power from the System - additional
power adapters are not needed.
2. BNC VIDEO INPUTS - Channel 1-8 camera inputs (used to connect Cameras with BNC
connection type). Cameras with BNC connections require an additional power adaptor.
3. VGA INPUT - Connect a PC (or other devices with a VGA Output) to the System. The System
will perform as a Computer Monitor (when in VGA Mode).
4. COMPONENT VIDEO IN - Connect a DVD Player, Set Top Box or Satellite Receiver to the
component Video Inputs (Y/Pb/Pr).
5. COMPONENT AUDIO IN - Connect a DVD Player, Set Top Box or Satellite Receiver to the
component Audio Inputs (Audio in Left/Right Channels). The Component (Composite) Output
must be turned ON on most DVD Players before connection to the System.
6. RELAY / PTZ / RS-232 BLOCK - These terminals are used to send a signal to a secondary
device or control PTZ (Pan/Tilt/Zoom) type cameras.
7. ETHERNET PORT - Connects the monitor to a router for connection to the internet. Refer to
Appendix #3 for Remote Connection setup.
8. DC INPUT - Connect the AC power using the power cord provided with the unit from the monitor
to an electrical outlet
9. RCA AUDIO INPUTS - Channel 1-4 Audio inputs (for BNC type cameras with standard RCA
Audio output)
6 PIN DIN
1 2 3 4 6 7 8
910 11 12
1. DIN Video Inputs 3. VGA IN Port2. BNC Video Inputs 4. Component Video IN
6. Relay / PTZ / RS-232 7. Ethernet 8. Power (DC 12V)
10. Spot Out9. Audio Inputs 11. Audio Out 12. Alarm Block
5
5. Component Audio IN