31
Display Menu
SEQUENCE
Sets the Sequence Mode for the display of
available channels. The Sequence Settings
for camera views can only be changed using
the Mouse or Remote Control.
• Activation - Turns the Sequence ON/
OFF.
NOTE: Up to 16 different Sequence Mode
settings can be configured, however only
ONE can be active at a time.
• List - Displays the Sequence Title
• ADD Button - Select the ADD button to
create a New Sequence:
zSequence Title - Enter a title for the
New Sequence
zActivation - Turn the Sequence ON/
OFF (only one sequence can be active at a
time).
zCANCEL Button - Cancels the addition
of the New Sequence.
zSAVE Button - Saves the New
Sequence, and moves to the New Sequence
Configuration screen:
MONITOR
• Sequence Dwell - Sets the cycle time
when the system is in Sequence Mode
(between 1~60 seconds).
• Spot-Out Dwell -The length of time to
display a camera in Spot-out mode.
• De-Interlace Mode - Removes the
screen spread when set to ON.
• Alarm Pop-Up Mode - Set to ON/OFF.
Switches the screen display to the
detected channel when an Alarm is
activated.
• Alarm Pop-Up Dwell - Determines the
length of time that a channel is displayed
when an Alarm is detected (between
1~60 seconds).
• Motion Pop-Up Mode - Set to ON/OFF.
Switches the screen display to any
channel when Motion is detected.
• Motion Pop-Up Dwell - Determines the
length of time that a channel is displayed
when Motion is detected (between 1~60
seconds).
• Aspect Ratio - Sets the Aspect Ratio for
the display to 4:3 (Letterbox) or 16:9
(Full Screen)
4:3 Ratio16:9 Ratio