111
Hard Drive Replacement - Appendix #11
Hard Drive Replacement - Appendix #11
The System comes with a pre-installed Hard Drive, however the unit will work with a replacement
single Hard Drive (up to 750GB).
NOTE: Make sure that the System is OFF and the power cable has been disconnected before
changing the Hard Drive.

Setting the New Drive to Master

• Refer to the General Jumper Pin Setting on HDD Surface (generally located on a sticker on
the top of the drive).
• Set the Jumper Pin Set to Master (1 Drive).

Connecting the SATA Cable

• Confirm the SATA Cable is securely connected within the System.
• Connect the SATA Data Cable to the Drive
• Connect the SATA Power Cable to the Drive.