110
Using the Storage Calculator - Appendix #10
Using the Storage Calculator - Appendix #10
The Storage Calculator application is used to calculate the amount of recording
time available on your Hard Drive, based on the System Recording Settings. This
application is located on the Software Installation CD (provided with your System)
1. Select the settings to reflect
the options you have chosen on
your System:
CH1~CH8 - Select the channels
to include in the Recording
Calculation
Resolution - Set the recording
Resolution to CIF (352x240),
2CIF (704x240) or D1 (704x480)
Quality - Set the recording
Quality to Low, Standard, High or
Highest.
FPS - Set the Frames Per
Second for the recording to 1, 2,
4, 8, 15 or 30 FPS.
AUDIO - Set the Audio
Recording selection to ON or
OFF (if audio is being recorded
on the system).
HDD Size - Select the size of the
System Hard Drive (160 GB
installed HDD is included with
this System).
2. Press the CALCULATE
button. The Software will use all
configurations to provide
recording data specific to your
System.
Main Screen - The Software loads with the following
defaults selected. Use the dropdown selections to
change the options to reflect your System settings.
Example of Recording Time Calculations