55
Advanced Recording
Alarm Schedule
Sets the Alarm Recording for each channel
(by hour). Select single or multiple time
blocks:
• Mouse Control: Click a single block to
open the Recording Type Menu. Click
and Drag a block of times to turn Alarm
Recording ON or OFF.
• Remote Control & Front Panel:
Navigate to the Channel Block section,
and the entire block will be highlighted
with a White outline:
zPress the ENTER button to access the
Time Blocks - the first hour on Channel 1
will be highlighted in Yellow.
zNavigate to the desired time block, and
press the ENTER button to activate the
block - if a single block is desired, press
ENTER a second time.
zTo select multiple blocks, use the arrows
to drag the cursor until the desired time
blocks are selected and press the
ENTER key.
zAlarm Recording will be turned ON or
OFF.
Once the settings have been adjusted for
the hour(s), the changed time block(s) will
be shown based on the legend:
Legend:
• None
• Alarm
Saving the Settings
You will be prompted to save the settings
when exiting a window (when changes have
been made)
Click on OK to save the settings, or
CANCEL to exit without saving.