89
Setting up Remote Viewing - Appendix #3
Adding a Site (Individual Unit Configuration)
DVR Information - Enter
the information specific to
the unit (refer to page 30
for setup instructions):
• Name - Enter a name for
the unit.
• IP / Domain Name -
Enter the IP address or
Domain Name for the
System. This will vary
depending on setup
(Internal Network
Connection or External
Remote access through
the Internet)- refer to page
30 for setup details.
• Port - Set to 6100 by
default.
• User ID - Enter the USER
ID to connect to the system
(the USER ID is configured
on the System - i.e. ADMIN
- case sensitive).
• Password - The
password used to access
the System (i.e. The
ADMIN password is set to
1234 by default).
Camera Assign - Set
each camera to a portion
of the 9-view window by
using the drop down
menu selections.
ADD Button - Adds the
site to the Group.
OK Button - Accepts the
changes and Closes the
configuration Window
NOTE: When entering the information for the IP / DOMAIN NAME:
• If you are connecting from within your network (i.e. The System and your PC are both inside
your house), you only need to enter the IP address of the System into the software (i.e.
192.168.0.105)
• If you are connecting from outside your network (i.e. The System is at Home, and your PC is
at work), use the DDNS Domain Name to configure the software).