29
Voice Setup

Overwrite Setup

Allows the DVR to overwrite previously recorded data, or to stop the recording once the hard
drive is full.
1. OVERWRITE: Allows the Hard Drive data to be overwritten once the drive becomes full. Press
the K and L buttons to highlight, and press the ENTER button to set to ON or OFF.
NOTE: If Overwrite is set to OFF, recording will stop once the drive is full.
2. WARNING SIGNAL: Turns the Hard Drive Overwrite Warning to ON/OFF. Press the K and L
buttons to highlight, and press the ENTER button to change the setting. If set to ON, a warning
signal will sound once the drive reaches 95% capacity (for the length of time set in the Warning
Duration)
3. WARNING DURATION: Sets the duration for the Warning Alarm to be active. Press the K and
L buttons to highlight, and press the ENTER button
Voice Setup
1. VOICE RECORD: Allows Voice (sound) to be recorded to the Hard Drive. Press the K and L
buttons to highlight, and press the ENTER button to set to ON or OFF.
2. VOICE REPLAY: Allows previously Recorded Voice (sound) to be played back on the DVR.
Press the K and L buttons to highlight, and press the ENTER button to set to ON or OFF.
3. VOICE CHANNEL: Sets the channel for Voice Recording. Press the K and L buttons to highlight,
and press the + and - buttons set to CH1, CH2, CH3, CH4 or QUAD.
4. VOICE VOLUME: Sets the Volume level for the DVR unit. Press the K and L buttons to highlight,
and press the + and - buttons to change the volume setting to 1 (low) to 10 (high), or mute.
Overwrite Setup Overwrite: ON
Warning Signal: OFF
Warning Duration: 10 Sec
Voice Setup Voice Record: OFF
Voice Replay: ON
Voice Channel: 1 CH
Voice Volume: 8