LOREX Technology L3104 instruction manual Initialize

Initialize

Initialize

1. HDD FORMAT: Formats the Hard Drive (deletes all recorded	HDD Format
	Factory Settings
data). Navigate using the K and L buttons, and press ENTER to	User Mode Save
Format. A prompt will appear to confirm the format - Press ENTER
	User Mode Restore
again to accept the Formatting, or press ESC to exit.
	Channel Set
2. FACTORY SETTINGS: Resets the DVR to Factory Defaults.	Time Set
Navigate using the K and L buttons, and press ENTER. A prompt	Advanced Setup
will appear to confirm the reset - Press ENTER again to accept	Serial Setup
the Reset, or press ESC to exit.

3.USER MODE SAVE: Saves all menu changes by User. Navigate using the K and L buttons, and press ENTER.

4.USER MODE RESTORE: Restores all menu changes by User. Navigate using the K and L buttons, and press ENTER.

5.CHANNEL SET: Sets the default screen view to Single Channel (1-4) or QUAD. Navigate using the K and L buttons, and press ENTER to change the setting.

Channel Set

Single Channel QUAD Channel

6.TIME SET: Sets the Date and Time for the DVR unit. Navigate using the K and L buttons. Press the < and > buttons to navigate, and the + and - buttons to set the time.

Time Set

7. ADVANCED SETUP: Controls the Advanced Features Setup:

Advanced Setup

01-15-2007 PM 12:01:02

IDSM Display: OFF

H-Sync Lock Set: ON

•IDSM Display: Displays the Active Recording area. Use the + and - buttons to change the display color to Light Blue, Light Green, Gray, Orange or Off.

•H-Sync Lock Set: Sets the NO VID message to appear onscreen with a bad camera signal is detected. Use the + and - buttons to change the option to ON or OFF.

8.SERIAL SETUP: Allows 3rd party Serial Data to be overlaid on the current Video (such as POS or GPS Data). Please see Lorexcctv.com for more details.

Serial Setup

Serial Data: None

APPLY

35