3.Press ENT to set the nearest waypoint as the active waypoint OR move the cursor to another waypoint and then press ENT.
The chosen waypoint is shown on the bottom line of the LCD.
3-1-5 Go to temporary waypoint
MENU SELECT | WAYPOINT | TEMP | TEMP1 |
►WAYPOINT | WP LIST | ►TEMP1 | ►GO |
BACKLIGHT | NEAREST WP | TEMP2 | TEMP EDIT |
BUDDY LIST | ►TEMP |
| DELETE |
LOCAL/DIST▼ |
|
|
|
1.Select WAYPOINT then TEMP.
2.Your temporary waypoint list is displayed. There are 3 choices for quick access.
3.Select the temporary waypoint to go to. Press ENT.
4.Press ENT to set the temporary waypoint as the destination waypoint. It is immediately shown on the bottom line of the LCD.
Tip: Hold down MOB and release before the 3 second countdown completes. Your current LL position is stored in TEMP1 to TEMP3 in the waypoint list.
If the list is full, a message appears. See following section to delete a TEMP WP.
TEMP IS
FULL
3-1-6 Edit or delete a temporary waypoint
MENU SELECT | WAYPOINT | TEMP | TEMP2 |
►WAYPOINT | WP LIST | TEMP1 | GO |
BACKLIGHT | NEAREST WP | ►TEMP2 | TEMP EDIT |
BUDDY LIST | ►TEMP |
| ►DELETE |
LOCAL/DIST▼ |
|
|
|
DELETE | WAYPOINT |
|
|
►YES | WP LIST |
|
|
NO | NEAREST WP |
|
|
| ►TEMP |
|
|
1.Select WAYPOINT then TEMP. Your temporary waypoint list is displayed.
2.Select the temporary waypoint to edit then select TEMP EDIT.
Note: To delete the temporary waypoint, select DELETE then YES. The temporary waypoint is deleted immediately and the temporary waypoint list is displayed again.
20 | Lowrance - |