5-5 Response to individual calls (INDIV REPLY)

You can respond to incoming individual calls with an automatic response or with a manual response.

An automatic response sends an acknowledgement and then sets the request link channel, ready for a conversation.

A manual response asks if you want to acknowledge the call, and then asks if you want to converse with the caller.

1.Select DSC SETUP, then INDIV REPLY.

2.Select AUTO for an automatic response, or MANUAL for a manual response.

3.Press ENT to confirm your choice and return to the menu.

DSC SETUP

INDIV REPLY

GROUP SETU▲

MANUAL

ATIS MMSI

►AUTO

ATIS SELECT

►INDIV REPL▼

 

5-6 Enable DSC functionality (DSC FUNC)

DSC functionality will operate only after a valid USER MMSI has been entered - see 5-1.

When DSC functionality is selected, the DSC symbol DSC is shown on the LCD.

DSC SETUP

▲

DSC FUNC

ATIS MMSI

►ON

ATIS SELECT

OFF

INDIV REPLY

 

►DSC FUNC

▼

 

1.Select DSC SETUP then DSC FUNC.

2.Select OFF to disable DSC functionality or select ON to enable the DSC functionality - ATIS (if applicable) must be turned off first.

Note: Disabling DSC functionality is not recommended.

3.Press ENT to confirm.

Note: It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. If you want to activate DSC, you must first switch ATIS off. A warning will remind you if ATIS is already ON.

40

Lowrance - Link-8 Operation Instructions