5-9 DSC Test Reply (TEST REPLY)

You can respond to incoming DSC TEST calls with an automatic response or with a manual response.

•MANUAL manual response is required, press ENT to confirm or press EXIT to cancel.

• AUTO

automatically replies after a 10 second delay with an ACK to any incoming

 

 

DSC TEST call.

DSC SETUP

▲

TEST REPLY

LL REPLY

►AUTO

AUTO SWITC

 

MANUAL

►TEST REPLY

 

 

TIMEOUT

5-10 Set the inactivity timer (TIMEOUT)

You can set the inactivity timer with the following options:

•AUTOMATED you can set the inactivity timer to automatically timeout after a period of inactivity for the following two categories: NON-DISTRESS or

DISTRESS.

Timeout options are:

DISTRESS: NO TIMEOUT; 5 MINS; 10 MINS (default is NO TIMEOUT)

NON-DISTR: NO TIMEOUT; 10 MINS; 15 MINS (default is 15 MINS)

•NON AUTO you can set the inactivity timer to exit any non-automated procedure activity.

Timeout options are:

NO TIMEOUT; 10 MINS; 15 MINS (default is 10 MINS)

Note: If NO TIMEOUT is selected, then you must press the EXIT key to exit the procedure.

Example: to set a 10 minute TIMEOUT for non-automated functions:

1.Select TIMEOUT, then select NON AUTO

2.Select desired timeout period: NO TIMEOUT, 10 MINS or 15 MINS

DSC SETUP

▲

TIMEOUT

NON AUTO

LL REPLY

►AUTOMATED

NO TIMEOUT

AUTO SWITC

 

NON AUTO

►10 MINS

TEST REPLY

 

 

15 MINS

►TIMEOUT

 

 

 

In this example, 10 MINS has been selected, meaning the radio will exit any non-automated procedure after a period of 10 minutes of non-activity.

42

Lowrance - Link-8 Operation Instructions