You can set up the radio to respond to an LL polling request in one of three ways:
•MANUAL reply manually to any incoming LL polling requests from your buddies.
•AUTO automatically replies to any incoming LL polling requests from any of your buddies.
| • OFF | ignores all incoming buddy LL polling requests. |
DSC SETUP | LL REPLY |
INDIV REPL▲ | ►MANUAL |
DSC FUNC | AUTO |
►LL REPLY | OFF |
AUTO SWITC▼ |
|
1.Select DSC SETUP then LL REPLY.
2.Select your response and press ENT to confirm and return to the menu.
When a DSC call is received, it may include a request to change to a specific channel for subsequent communications. If a channel switch request is included, your options are:
•allow the radio to switch to the requested channel immediately by pressing the ENT button, or
•do nothing to allow the radio to automatically switch to the requested channel after a delay of 10 seconds, or
•cancel the automatic switch and remain on the current channel by pressing the EXIT button.
However, automatic switching to a subsequent communications channel on receipt of a DSC call might in some cases disrupt important ongoing communications if the working channel changes without the operator knowing.
You can prevent the radio from automatically switching from the current working channel by setting the AUTO SWITCH feature to OFF.
If the AUTO SWITCH feature is set to OFF, an X will be displayed on the LCD to remind you that this feature is set to off. Additionally, the text “AUTO SW OFF” will be included in an All Ships or Group call replacing the text “AUTO CHxx”
DSC SETUP | ▲ | AUTO SWITCH |
DSC FUNC | ►ON | |
LL REPLY |
| OFF |
►AUTO SWITC |
|
|
TEST REPLY▼ |
| |
1.Select DSC SETUP, then AUTO SWITCH.
2.Select ON (on) to enable automatic channel switching.
3.Select OFF (off) to disable automatic channel switching.
Lowrance - | 41 |