DSC SETUP | INPUT ATIS | ATIS MMSI | ATIS MMSI |
USER MMSI | MMSI | 9987654321 | INPUT AGAIN |
GROUP SETUP | 9 | ►STORE | 9 |
►ATIS MMSI |
| CANCEL |
|
ATIS SELEC▼ |
|
|
|
ATIS MMSI 9987654321 ►STORE CANCEL
2.If this is the first time that you are entering your ATIS MMSI, a dashed line appears. Enter your ATIS MMSI along the dashed line. The first number is always 9. Press ENT to confirm each correct entry and to move to the next digit.
If you make an error, press – until < appears then press ENT to backup and correct the entry.
3.Press ENT to store the ATIS MMS.
4.Enter your ATIS MMSI again as a password check, then press ENT to permanently store the ATIS MMSI and return to the menu.
5.You can view your stored ATIS MMSI at any time by selecting ATIS MMSI in the main menu.
EU models only.
ATIS functionality will operate only after the ATIS MMSI has been entered (see previous section).
When ATIS functionality is enabled, the ATIS symbol ATIS is shown on the LCD.
DSC SETUP | ATIS SELECT |
GROUP SETUP | ►ON |
ATIS MMSI | OFF |
►ATIS SELECT |
|
INDIV REPL▼ |
|
1.Select DSC SETUP then ATIS SELECT.
2.Select OFF to disable ATIS functionality or select ON to enable the ATIS functionality - DSC must be turned off first.
3.Press ENT to confirm.
Note: It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. If you want to activate ATIS, you must first switch DSC off. A warning will remind you if DSC is already ON.
Lowrance - | 39 |