3-6-1 Manually enter position and UTC time (MANUAL)
Note: this function is available only if an operational GPS receiver is not connected.
MENU SELECT | GPS/DATA | MANUAL LL |
| 14:38 UTC |
| |
LOCAL/DIST | ►MANUAL | . | N | M17 | 32.233 | S |
CONTRAST | SETTING | . | W | 160 | 45.651 | E |
►GPS/DATA |
| |||||
| MAN |
|
|
| ||
RADIO SETU |
|
|
|
|
|
|
1.Select GPS/DATA then MANUAL.
2.Enter the latitude, then the longitude, then the UTC.
3.Press ENT when all the information is correct.
The vessel’s latitude and longitude are shown on the screen, with the UTC time. The prefix M indicates a manual entry. The manual entries are cancelled if a real GPS position is received.
Note: a warning will be displayed after 4 hours to remind you that the current position information is manually entered.
3-6-2 Local time (TIME OFFSET)
If your position and time data are being updated through a GPS navigation receiver, you can enter the time difference between UTC and local time and display your local time on the LCD.
MENU SELECT | GPS/DATA | SETTING | TIME OFFSET |
LOCAL/DIST▲ | MANUAL | ►TIME OFFSET | +00.00 |
CONTRAST | ►SETTING | TIME FORMAT |
|
►GPS/DATA |
| TIME DISPLY | 04:43 UTC |
RADIO SETU▼ |
| LL DISPLY ▼ |
|
TIME OFFSET | 07:50AM LOC |
|
|
+03.00 | 17 36.233 N |
|
|
|
|
| |
07:43 LOC | 161 05.651 E |
|
|
|
|
|
1.Work out the time difference between UTC and your local time (from the following graphic).
2.Select GPS/DATA then SETTING.
3.Select TIME OFFSET to enter the difference between UTC and local time. Use the Channel Select knob or + or – to change the time. Half hour increments can be used with a maximum offset of ±13 hours.
4.Press ENT when the local time is correct.
LOC is displayed after the time on the LCD as a reminder that local time is selected.
Lowrance - | 25 |