Displaying EP-80R TH Temp Sensor Information
The Overlay Data function will be used to show temp sensor data on your unit's main display.
NOTE:
Make sure your temp sensor has been configured before attempting to display temperature data on your display unit.
To add temp sensor as overlay data:
1.Press MENU, highlight OVERLAY DATA and press ENTER.
2.Select (PRESS ENT TO ADD…) and press ENTER.
3.Highlight NMEA 2000 and press ENTER. A list of devices on the net- work will appear.
4.Select the desired temp sensor and press ENTER. Its temp type (con- figuration) will appear underneath it next to a checkbox.
5.Highlight the temp type and press ENTER, which will place a check- mark in its checkbox. It now will be shown as overlay data on your unit's main display.
6.Repeat steps 4 and 5 to display the other temp sensor data, or press EXIT repeatedly to return to the main display.
27
