Unconfiguring a Temp Sensor
You could unconfigure a temp sensor by changing its temp type to un- known or you can use the Restore Defaults command, which will reset the temp type and device name to default settings.
To restore default settings:
1.Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER. A menu will appear with five options: Bus Setup, Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight Synchroniza- tion.
2.Highlight BUS SETUP and press ENTER, which will open the Bus Con- figuration menu. A list of network devices will be at the top of the page.
3.Select the desired temp sensor and press ENTER. The Device Con- figuration menu will appear.
4.Highlight ADVANCED OPTIONS and press ENTER.
5.Select RESTORE DEFAULTS and press ENTER. The following message will appear: Are you sure you wish to change this device's configuration?
6.Highlight YES and press ENTER. Press EXIT repeatedly to return to the main display.
Reconfiguring a temp sensor
A temp sensor can be reconfigured by changing its temp type. If the desired configuration name is already configured to another temp sen- sor, you can unconfigure that sensor to make its configuration name available.
To change Temp Type:
1.Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER. A menu will appear with five options: Bus Setup, Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight Synchroniza- tion.
2.Highlight BUS SETUP and press ENTER, which will open the Bus Con- figuration menu. A list of network devices will be at the top of the page.
3.Select the desired temp sensor and press ENTER. The Device Con- figuration menu will appear.
4.Highlight TEMP TYPE and press ENTER. The following options will ap- pear: Water, Outside, Inside, Engine Room, Cabin, Live Well, Bait Well, Refrigeration, Heating System and Unknown.
5.Highlight the desired Temp Type and press ENTER. The following confirmation message will appear: Are you sure you wish to change this device's configuration?
6.Highlight YES and press ENTER. Press EXIT repeatedly to return to the main display.
26
