configuration menu. Select RECONFIGURE and press ENTER. That will di- rect you to the Temp Selection menu, which will have three options: Water, Outside and Inside.
6.Select OUTSIDE and press ENTER. You will be taken back to the Bus Devices list. The temp you just reconfigured (formerly water temp) will now be displayed as Outside Temp.
7.To configure the unconfigured Temp (formerly Outside temp), high- light UNCFG TEMP from the Bus Devices list and press ENTER to open the Temp Selection menu, which will have three options: Water, Outside and Inside. Highlight WATER and press ENTER. You will be taken back to the Bus Devices list. The temp (formerly outside temp) will now be displayed as Water Temp.
If desired configuration name available:
1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press ENTER.
2.Highlight BUS DEVICES and press ENTER. Select WATER TEMP and press ENTER to open the configuration options menu.
3.Select RECONFIGURE and press ENTER to open the Temp Selection menu, which will have three options: Water, Outside and Inside.
4.Highlight OUTSIDE and press ENTER. You will be directed to the Bus Devices list where the temp will now be shown as Outside Temp.
NOTE:
If your temp sensor is not updated on the Bus Devices list, refresh the list by closing it and then access it again.
Displaying EP-80R TH Temp Sensor data:
You can display temp sensor data on the Single Analog, Dual Analog, Quad Analog, Single Digital, Dual Digital and Quad Digital pages.
Page Screen Rotation
The Page Screen Rotation consists of multiple pages that have been set up for display. Once pages have been added to the page screen rotation, they can be set to scroll across the screen automatically or manually. Use the ENTER and EXIT keys to manually scroll pages across the screen. Pressing the ENTER key moves the scroll in one direction. Push- ing the EXIT key moves the scroll in the other direction. You will use the Page Scrolling if you want pages to automatically scroll across the screen. Refer to your
18
