Lowrance electronic EP-80R TH installation instructions

Pub. 988-0154-442

EP-80R TH

Electronic Thru-Hull Temp Sensor

Installation and Configuration Instructions

This document shows how to install an EP-80R TH thru-hull temp sen- sor and how to connect it to a NMEA 2000→ network. It also provides instructions on how to configure your temp sensor with Lowrance digi- tal gauges (LMF-200 & LMF-400) and display units.

NMEA 2000 is the communication bus standard developed by the Na- tional Marine Electronics Association (NMEA) for use in boats. Lowrance has introduced a line of products that can communicate over a NMEA 2000 network (LowranceNet).

All Lowrance NMEA 2000 capable devices are either NMEA 2000 certi- fied or certification is pending.

CAUTION:

Installing LowranceNET NMEA 2000 devices is significantly different from installing earlier Lowrance components without NMEA 2000 features. You should read all of the installation in- structions before proceeding. Decide where you want to install all components before drilling any holes in your vessel.

Some sonar or GPS units may require a software upgrade to display NMEA 2000 data correctly. For free software upgrades or additional information on the LowranceNet NMEA 2000→ network system, visit our web site, www.lowrance.com.

Red NMEA 2000	Thru-hull
connector
	temp sensor
	module

The EP-80R TH temperature sensor.

1