To unit | Optional power off switch | ||
for saltwater installations | |||
| |||
| Black wire |
| |
| 12 volt | Red wire with | |
| 3 amp fuse | ||
| battery | ||
|
| ||
Power and transducer connections for the X51 Pro
sonar unit (direct battery connection shown).
CAUTION:
Do not use this product without a
This unit has reverse polarity protection. No damage will occur if the power wires are reversed. However, the unit will not work until the wires are attached correctly.
Mounting the Sonar Unit
You can install the sonar unit on the top of a dash with the supplied | ||
bracket. | 107.5 | 82.7 |
| ||
| [3.26] | |
| [4.23] | |
|
| |
156
[6.26]
| 12.09 [0.48] |
|
76.9 | Millimeter | 70.3 |
[3.03] | [Inch] | [2.77] |
Front view (left) and side view (right) showing dimensions of the X51 Pro when mounted on quick release bracket. The swivel base (not shown) adds 0.4" (10 mm) to the height. The swivel base width is 4.25" (10.7 cm) and the depth is 3.12" (79.47 mm).
17
